Chest of drawers plan for woodcraft

The presented model consists of a chest of drawers and eleven drawers of three types of sizes: small; medium and large.

Chest woodcraft

Material for chest of drawers woodcraft

  • panels of glued solid wood 18; 20 and 25 (mm) thick;
  • wood 25х50 (mm);
  • water-resistant plywood with a thickness of 5 (mm);
  • wood-fiber Board 3 (mm) thick.

Fastening element:

  • eccentric screed;
  • screw confirmat;
  • plastic plug.

Fastening element for chest drawer woodcraft

 

The body of chest of drawers

The body consists of two side walls, fastened together with wooden bars and a rear wall of fiberboard. Between the laths of the partition box compartments. Top and bottom decorative panels 25 (mm) thick are attached. Four legs are installed on the bottom panel.

Drawing of chest of drawers
Drawing of chest of drawers

Drawer of chest

Chest drawer

The frame of the box is made of 20 (mm) thick panels. Bottom panels, milled grooves, is inserted into a plywood bottom. To the front side of the box, attached decorative facade with handle.

The drawer is fixed to the full extension rails L = 450 (mm).

The drawing of the drawer.

The frame of the box made of 20 (mm) thick panels. Bottom panels, milled grooves, inserted into a plywood bottom. To the front side of the box, attached decorative facade with handle.

The drawer fixed to the full extension rails L = 450 (mm).

The drawing of the drawer
The drawing of the drawer

Leave a Reply

Your email address will not be published. Required fields are marked *